A lovely well presented 1988 HR312 with teak decks – made by the world-renowned prestigious manufacturer Hallberg-Rassy.

This is a good example of a higher spec’d HR312 with teak decks and cockpit.  Generous space below and well designed layout.  Heads is to die for with the decent sized china wash basin. And lots more…

Dimensions

Length Overall: 9.42m / 30’11”

Length at Waterline: 7.70m / 25’3″

Beam: 3.08m / 10’1″

Max Draft: 1.62m / 5’4″

Displacement: 4,900 kg / 10,803 lbs

Ballast: 2,200 kg / 4,850 lbs

Airdraft above w/l: @ 18.5m

Headroom: 1.85m / 6’8/10ths”

Lloyd’s Certificate of Hull Construction.

Iron keel all moulded inwith GRP

Rudder shaft in bronze as are the fittings.

Engine

Volvo Penta 2003 28hp 3 Cylinder Raw Water Cooled Marine Diesel Engine – hours not known.

110S Sail drive with seals last done 2023

New stainless steel exhaust elbow and piping 2023

2023 engine was removed, fully refurbished and re-installed.

Tankage

Fuel: 110 l

Water: 120 l

Accommodation

Forward cabin with 2 comfortable berths, 2.00m long. Filler between berths, below berth storage. Shelves to sides.

The heads is fitted with a marina WC and washbasin with fresh water from a foot pump. Headroom 1.80m.

The main cabin/saloon is built with fair sized sofa-berths both port and starboard.

The Starboard side sofa is made as an ‘L’ Sofa. Behind the swing up backrests is stowage for bedding. The sofas are 1.95m long. Bookshelves and locker over the sofas.

Large Table with fold down top panels. Stowage for bottles etc. in the centre of the table.

The inside of the hull above the berths is panelled with mahogany. The ceiling is lined with Vinyl panels.

Headroom in main cabins is 1.85m. Aft in the main saloon is an L shaped Galley equipped with 2 burner stove with oven on gimbals. Drained 80L Icebox.

The electrical switch panel with voltmeter and main meter for fuel is placed for easy access.

Large quarter berth to starboard.

Rig and Sails

Alloy mast with masthead rig; and boom with solid kicker

Mainsail with new lazy bag and jacks in 2023; slab reefing

Furling Genoa (approx. 6 years old)

Storm Jib

Spinnaker Pole and Spinnaker

Standing and running rigging all replaced in 2023; as were the life lines

New Lewmar rope clutches on both sides (2023)

New Profurl C320 furler and foil

Electrical

12v / 240v

2 batteries:  Engine and Domestic

Alternator charged

LED lighting internal and external (2023)

Marinco shore power cable – new 2023

New auto bilge pump – Whale SuperSub 1100 – (2023)

Mast has been re-wired

New LED tri-colour and LED steaming light

New Windex

New VHF antenna

Navigation Kit

Current owner has fitted:

Actisense NMEA-2000 system installed 2023

Vespa Cortex-V1 VHF/Smart AIS system installed 2023 – Cortex apps let you monitor boat systems, receive alerts and remotely control devices from your compatible smartphone.

AIS transponder

VHF radio – wired handset and one wireless handset (with DSC)

Built-in VHF splitter

GPS

Supports WiFi and mobile app connection

Wired into NMEA system

New Depth/speed/temperature transducer

The wiring for the previous systems remain in place for the next owner to do with as they wish.

Inventory

Fenders and warps

Danforth Anchor with chain and warp

Manual anchor windlass

Fire extinguishers all replaced 2023

Fire blanket

Deck brush and boat hook